Peach Ginger Soda (Ginger Bug Recipe) - Insane in the Brine (2024)

Here in Georgia we’re lucky to be able to grow some of the world’s greatest peaches. And even though we’re the “Peach State,” our neighbors like Tennessee and North Carolina also grow amazing peaches. This time of year, I love making different dishes with these local and regional fruits. I have an out of this world cobbler recipe I’ll have to share some time.

The sharp, zingy flavor of ginger just seems to be born to mix with the sweet, syrupy taste of peaches. And so this drink was born! It’s super refreshing by itself. I also use it as a mixer for a peach bourbon mule which is DY-NA-MITE!

Like kombucha and water kefir, ginger bug sodas (and almost any cultured drink really) can always be tailored to suit your tastes and interests. This is one recipe I love but you can tweak it how ever you want. Maybe add some mint or lime to the mix?

Although some sugar source is needed to feed the ginger “bug” culture (this is the essence of fermenting, after all), even this can vary greatly depending on your tastes and health choices.

You are free to decrease or increase the sugar level; this recipe is about 20% less sugar than co*ke. However, some sugar is needed for the ginger big culture to feed on, which produces the carbonation. If you want a mildly sweet drink, I would go down to about 1/3 cup sugar.

Side note: If you need to make a ginger bug starter culture, which is an easy process but that takes several days to a week,click here.

So let’s get started!

You will need:32 oz. flip-top bottle,bottling funnel, medium cooking pot, measuring cups, grater, wooden spoon,mesh strainers, wax paper or plastic wrap

You will also want a lipped liquid container large enough to hold your strained wort, such as this:

Ingredients:

  • 3.5 cups filtered or distilled water
  • 4-5 peaches (~1-1.25 lbs. before pitted), washed, pitted, and quartered
  • 1/2 cup sugar
  • 1 nub ginger (~30-40g for ginger “beer” style soda, ~15-20g for ginger ale style), grated
  • 1/4 cupginger bug starter culture

Tip: For a peach-ginger-lemon-mint version, I’ve added muddled mint to the wort when it was warm but no longer hot, and then juice of a lemon added when the wort cooled. This is to protect their delicate flavors. Then strain the mint and bottle as usual.)

For a stronger peach flavor, you can also just start with a peach juice product (no need to add more sugar). Using the juice from juiced peaches is another option. It is delicious but can form a thin layer of yeast buildup towards the top of the jar (it’s basically a non-issue but worth knowing up front).

Directions:

1.) In a pot, combine the water, sugar, quartered peach pieces and grated ginger. (This mix is called the wort.)

Peach Ginger Soda (Ginger Bug Recipe) - Insane in the Brine (1)

2.) Bring to boil, and stir until sugar is dissolved. Reduce heat to low, cover, and simmer for at least ten minutes.

3.) Turn off heat and allow to come to room temperature (can place covered pot in fridge to speed up process).

4.) Once the wort is room temperature, strain out 1/4 cup of your ginger bug starter liquid and place it in the fliptop bottle.

Peach Ginger Soda (Ginger Bug Recipe) - Insane in the Brine (2)

5.) Next, remove the peach pieces from the pot and set aside in a bowl (they will hold and leak liquid which you want to save to use later).

6.) Strain the remaining wort in the pot through the fine mesh strainer into the lipped 4-cup container

Peach Ginger Soda (Ginger Bug Recipe) - Insane in the Brine (3)
Peach Ginger Soda (Ginger Bug Recipe) - Insane in the Brine (4)

7.) From there, pass the liquid through 1-2 mesh strainers again, into the bottling funnel (which also may have a built-in strainer).

Peach Ginger Soda (Ginger Bug Recipe) - Insane in the Brine (5)

8.) Transfer all the ginger bug and wort into the bottle.

Note: you may notice that the liquid level still seems low. Remember that we reserved the peach pieces. They are likely holding a fair amount of liquid and flavor. If you need more wort to fill the bottle, the peach pieces can be wrapped in wax paper or saran wrap, and thoroughly squeezed to extract the liquid. (You can squeeze it into the lipped 4-cup measuring cup.) This liquid should also be strained on its way to the bottle.

Ferment length: Now that the bug and wort have filled the bottle, it should be sealed and kept at room temperature for about three days (unless it appears quite active and bubbly before then), and then kept overnight in the fridge. You may notice that the peach color fades somewhat over the first day; it is normal. Once it has sat overnight in the fridge, it is ready to go!

This drink (and ginger bug drinks in general) can get quite active! Don’t shake it and I recommend opening it slowly, with your other hand pressed down over the fliptop, over a sink.

And don’t forget to try it with some bourbon and maybe a few dashes of peach bitters like this:

Enjoy and happy fermenting!

Peach Ginger Soda (Ginger Bug Recipe) - Insane in the Brine (2024)

FAQs

Peach Ginger Soda (Ginger Bug Recipe) - Insane in the Brine? ›

If you're not seeing bubbles after a few days, it's possible your ginger bug was contaminated, had traces of chlorine, or was sterilized by harsh direct sunlight. We'd recommend starting over on your ginger bug.

Why won t my ginger bug ferment? ›

If you're not seeing bubbles after a few days, it's possible your ginger bug was contaminated, had traces of chlorine, or was sterilized by harsh direct sunlight. We'd recommend starting over on your ginger bug.

How much sugar for ginger bug soda? ›

salt, ¾ cup raw sugar, 3 tablespoons dried elderberries, and 2 cups of filtered water. Allow to cool and then strain the mixture. Add ¼ cup of lemon juice, ½ cup ginger bug, and 5 ½ cups of filtered water. Bottle and ferment per the basic recipe.

How long can you ferment a ginger bug? ›

After 4-7 days your healthy culture will be ready. If you aren't sure, just give it the full 7 days to ferment. Strain your ginger bug into a clean jar and toss away all the old ginger. Now you can use it to make homemade, naturally carbonated sodas.

How much ginger bug to add to juice? ›

Add 1/4 cup ginger bug starter to your mason jar. Fill jar with juice of choice to the neck of your jar. Cover and ferment 3 to 7 days or until it tastes good to you. If you like carbonation, you can move onto secondary fermentation and fill swing top beer bottles with your fermented juice.

Why is my fermentation not fermenting? ›

The most common causes are: Dead (not vital) or unhealthy (not viable) yeast cells. Too little yeast pitched. Too much yeast pitched, causing excessive krausening and loss of healthy yeast through blow off.

Why is my ginger bug no longer bubbling? ›

If you see no bubbles at all after a full 24 hours, then something may have gone wrong (try adding another "dose" of Ginger Bug and letting ferment for up to 24 hours until the bubbles form).

How often should I burp ginger bug soda? ›

Once you have an active ferment you will have to maintain your bug. Shake and burp your bug twice a day. Around every 4 days you will need to add 25g of grated ginger root, 25g of sugar and 25mL of water. You can strain some of your bug fo a strong tonic drink or you can use it as a starter for other drinks.

Is ginger bug healthy? ›

The authentic version of ginger beer is a two-step process using a ginger bug, which is a collection of beneficial bacteria and yeasts. The resulting beverage is rich in probiotics, which, when consumed as part of a regular diet, will promote a healthy digestive system.

Is it safe to drink ginger bug? ›

Once you have a healthy ginger bug, you can add it to a sweetened beverage like fruit juice, lemonade, or sweetened herbal tea. The ginger bug will consume the sugar in the drink and transform it into a healthy, bubbly, probiotic-rich soda.

How to tell if a ginger bug is bad? ›

Watch out for mold or a bad smell, which means it's gone off. The amount of time it takes to catch a ginger bug depends on a lot of things: temperature, the strains of wild yeasts in your home, and how fresh the ginger is.

Why did my ginger bug mold? ›

This means your bug is fermenting! Note: it's important that your ginger stays below the water, or else your bug can mold due to being exposed to the air.

How do I know if my ginger bug is active? ›

The smell will start to develop to and become more yeasty and gingery. You will also see small bubbles rising from the bottom of the jar. After 5 -7 days you should see that the ginger bug is alive and active and it is now ready to use.

Does a ginger bug produce alcohol? ›

The natural fermentation process may produce trace amounts of alcohol, but Gingerbug contains less than 0.5% alcohol, similar to non-alcoholic beer.

Do you peel ginger for ginger bug? ›

For the Ginger Bug: 2 to 3 tablespoons peeled and diced fresh ginger. 2 to 3 tablespoons granulated sugar. 2 cups distilled or filtered water.

How to tell if a ginger bug is active? ›

The smell will start to develop to and become more yeasty and gingery. You will also see small bubbles rising from the bottom of the jar. After 5 -7 days you should see that the ginger bug is alive and active and it is now ready to use.

How long does it take for ginger beer to start fermenting? ›

This process takes about 1 to 3 weeks, depending on how active your ginger bug is and how warm your home is. Step 3: Bottle the ginger beer and allow it to ferment further – Once the beverage becomes effervescent (fizzy/probiotic-rich) we bottle it and allow it to sit for “secondary fermentation” (more on this below).

Does ginger prevent fermentation? ›

Bloating and gas. Eating ginger can cut down on fermentation, constipation and other causes of bloating and intestinal gas.

References

Top Articles
Latest Posts
Article information

Author: Foster Heidenreich CPA

Last Updated:

Views: 5346

Rating: 4.6 / 5 (76 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Foster Heidenreich CPA

Birthday: 1995-01-14

Address: 55021 Usha Garden, North Larisa, DE 19209

Phone: +6812240846623

Job: Corporate Healthcare Strategist

Hobby: Singing, Listening to music, Rafting, LARPing, Gardening, Quilting, Rappelling

Introduction: My name is Foster Heidenreich CPA, I am a delightful, quaint, glorious, quaint, faithful, enchanting, fine person who loves writing and wants to share my knowledge and understanding with you.